***AMAZING PRODUCT!!! FANTASTIC RESULT!!***

Labels: · Posted by at
LIAMTU Skin Sticker Cover Limited Edition Look kit Blue Fire Skull Decals for the Xbox One Console and Controller (Video Game)




This Blue Fire Skull Skin Sticker for the Xbox One Console and Controller by LiamTu is AWESOME!!
Applying the entire skin was super easy to do and the pieces are cut perfectly to fit every spot!
I grabbed a bottle of rubbing alcohol and a cloth to remove any spots or dust particles on the surface before
placing down the skin. I gently wiped the entire Xbox down then took all of the pieces out of the bag.

I looked at every piece and thought to myself where each one would go before I did anything permanent. I decided to start with the biggest piece that lays on top of the console. Before I began I noticed that there was a logo cut-out in the skin so I decided to use that as my guide. I carefully picked the edge of the skin to get the backing to come apart and started to line the sides up with the logo in place. Once it was in the best place I then stuck it down with force and used a plastic card to scrape into place. If you use the plastic card like I did be careful because it will make a scratch in the skin if you press hard. But, using the card really did help me with any imperfections or bubbles so I do suggest using one! Gently push the card down as you slowly pull off the backing to place down more of the skin into place.

I looked to the pieces and grabbed my next section which was the bottom right corner. I decided to do this corner first because it had a logo cut-out on it just like the first one and was the perfect one to keep everything aligned. I used the same method for the entire console. I just slowly peeled off the backing to the skin down but I didn't apply force until I made sure that it was properly placed. It's very easy to peel back up if you make a mistake so I was sure to take my time and place the skin down gently then go back with the plastic card to press it down.

The next piece I did was the bottom left side where the disk goes into the Xbox. This was also very easy to follow because it had the disk slot in place to act like a guide. After I got that piece on to cover the entire front I did the easiest one which for me was the right side. The skin and Xbox both have a line at the top of the back part that slants down so it was the best place to start. Before I knew it, I had the entire console covered and it looked amazing!!

My son didn't want the Xbox One with a Kinect so unfortunately I didn't get to use that piece but I always have it in case! I just moved on to do the controller and it was just as easy. This was the only time that I took the entire back off the skin to place it down onto the surface. I carefully eyed the controller cut-out spots together and gently placed it down. When I had the skin in the perfect place I went back to press it down permanently. I am very happy with the results because my sons Xbox One with the skull skin on it looks fantastic!! My son really liked it when I showed him too! I strongly recommend this product and I will definitely be buying skins for everything now!

I did receive this product to test and review at very low discounted rate in exchange for my honest and unbiased opinion. All opinions stated are 100% my own!

To purchase your own skull skin Click Here!

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)